Sealmaster 1-15/16"-ID 2-B TRB PILLOW BLOCKS SEA RPB-115-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288479994
-
Manufacturer Part Number550213
-
CountryUSA
-
Load Capacity8070 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2500 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width2-7/16 in
-
Base to Bore Centerline2-1/4 in
-
Bolt Center-to-Center Length6-5/16 to 7-3/16 in
-
Bore Diameter1-15/16 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-5/8 in
-
Overall Length8-7/8 in
-
Overall Width3-1/2 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-115-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 1-15/16"-ID 2-B TRB PILLOW BLOCKS SEA RPB-115-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
9" X 4" COARSE RUBBER FLOAT TOOLS-JWH330555 >
MORSE® 43118 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 9/16 in Dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-1/8 in OAL, Bright
MORSE® 43118 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 9/16 in Dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-1/8 in OAL, Bright
Starrett® 449BZ-6R Mechanical Depth Micrometer With Non-Rotating Blade, 0 to 6 in, Graduations: 0.001 in
The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
CGW® 34435 2-Side Recessed Surface Grinding Wheel, 12 in Dia x 2 in THK, 3 in Center Hole, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
CGW® 34435 2-Side Recessed Surface Grinding Wheel, 12 in Dia x 2 in THK, 3 in Center Hole, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
LADDER FRONT LEG CRUTCH TIPS-LOU999928A >

