Dodge® 070371 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL 7.56 in OAH
Dodge® 070371 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7.56 in OAH
-
BrandDodge®
-
UPC782475306008
-
Manufacturer Part Number070371
-
CountryUSA
-
Load Capacity65500 lb Dynamic/81500 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1280 rpm
-
TypeType S2000
-
Mounting TypeFour-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width4.13 in
-
Base to Bore Centerline3-3/4 in
-
Bolt Center-to-Center Length9.38 to 10.63 in
-
Bore Diameter3-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height7.56 in
-
Overall Length13 in
-
Overall Width4.02 in
- Case-carburized inner rings resist cracking
- Factory sealed, lubed, and adjusted
- More contact area
- Larger rollers
- Expansion capability up to 3/8 in
- Permits static or dynamic misalignment up to +/- 1 deg
- Flinger to shield seal and bearing from contamination/damage
- High-capacity double row spherical rollers
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 07547570 |
-
Alternative Part NumberP4B-S2-307R|70371
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Line Drawing
-
Line Drawing
-
Catalog
Recently Viewed
Dodge® 070371 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL 7.56 in OAH
Dodge® 070371 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7.56 in OAH
Browning® 767747 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-3/8 to 5-1/16 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5-15/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
True Temper® 1161300 Crow Bar, Pinch Point Tip, 36 in OAL, Steel
Browning® Gearbelt® 1055284 Type 2 Synchronous Timing Pulley With Flange, 1/2 to 7/8 in Bore, 2.119 in OD, 18 Grooves, 2.149 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
1-1/2" STIFF PUTTY KNIFE-JWH775894 >
