Dodge® 070288 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL 7-1/2 in OAH
Dodge® 070288 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7-1/2 in OAH
-
BrandDodge®
-
UPC782475305933
-
Manufacturer Part Number070288
-
CountryUSA
-
Load Capacity65500 lb Dynamic/81500 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1280 rpm
-
TypeType S2000
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width3.42 in
-
Base to Bore Centerline3-3/4 in
-
Bolt Center-to-Center Length9.38 to 10.63 in
-
Bore Diameter3-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height7-1/2 in
-
Overall Length13 in
-
Overall Width4.02 in
- Permits static or dynamic misalignment up to +/- 1 deg
- Flinger to shield seal and bearing from contamination/damage
- High-capacity double row spherical rollers
- Larger rollers
- More contact area
- Case-carburized inner rings resist cracking
- Factory sealed, lubed, and adjusted
- Expansion capability up to 3/8 in
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940961 |
| Motion Industries | 07547552 |
-
Alternative Part Number70288|P2B-S2-307R
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Line Drawing
-
Catalog
-
Warranty Information
Recently Viewed
Dodge® 070288 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL 7-1/2 in OAH
Dodge® 070288 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7-1/2 in OAH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
MORSE® 13074 1333 General Purpose Jobber Length Drill Bit, 5 mm Drill - Metric, 0.1969 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85041 330QI General Purpose Jobber Length Drill Bit, N Drill - Letter, 0.302 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85063 330QI General Purpose Jobber Length Drill Bit, #9 Drill - Wire, 0.196 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
