Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
-
BrandDodge®
-
UPC782475006366
-
Manufacturer Part Number006064
-
CountryUSA
-
Load Capacity1090 lb
-
Temperature Rating130 deg F
-
FinishPowder Coated
-
MaterialCast Iron
-
Maximum Speed400 rpm
-
TypeBabbitted Split
-
Mounting TypeTwo-Bolt Base
-
Seal TypeUnsealed
-
Base Width3 in
-
Base to Bore Centerline2-1/8 in
-
Bolt Center-to-Center Length6-7/8 to 7-3/8 in
-
Bore Diameter2-7/16 in
-
Expansion TypeExpansion
-
Overall Height4-1/4 in
-
Overall Length9-1/4 in
-
Overall Width5 in
- Solid or fully split housing
- Babbitted bearing surface
-
Alternative Part NumberP2B-BASP-207
-
UNSPSC31171515
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Line Drawing
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
NCS-2616a heavy-duty, machined inch-series needle roller bearing designed without an inner ring.
• Bore Diameter (Under Rollers - \(F_{w}\)): 1.6250 inches (41.275 mm)
• Outside Diameter (D): 2.1875 inches / 2-3/16" (55.563 mm)
• Width (B): 1.0000 inch (25.400 mm)
• Dynamic Load Capacity (\(C_{r}\)): 10,500 lbf (47.0 kN)
• Static Load Capacity (\(C_{0r}\)): 16,600 lbf (74.0 kN)
• Limiting Speed: 11,000 RPM (Oil lubrication)
• Mass (Weight): ~0.44 lbs (163 grams)
2"-ID 300-SERIES PILLOW BLOCK UNIT - FYHUCPX1032>
Enerpac® A64 7-Port Long Hydraulic Manifold
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Browning® 1077098 QD Bushing, 2 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
Browning® 1077098 QD Bushing, 2 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
