M.K. Morse HOLESAWS--USE "MOR" M-HS-T-40
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
-
BrandMorse®
-
UPC050326160407
-
Manufacturer Part NumberAT40
-
CountryUSA
-
ColorBlack
-
Use ArborM45PCT
-
Applicable MaterialsAcoustic Tile, Countertops, Drywall Fiberboard, Fiberglass, Plaster, Plastic and Nail-Free Wood
-
Cutting Depth1-1/2 in
-
Shank Size7/16 in
-
Cutting Edge MaterialTungsten Carbide
-
Cutting Edge StylePositive Rake
-
Shank TypeHex
-
Diameter2-1/2 in
-
Drill Size1/4 in Dia x 4 in L
-
TPI or Pitch3 TPI
-
Alternative Part Number160407
-
UNSPSC23241601
-
Package Description1/BX
-
WarrantyLimited
-
Catalog
-
Warranty Information
Recently Viewed
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Enerpac® A64 7-Port Long Hydraulic Manifold
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
Dodge® 006064 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 6-7/8 to 7-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 9-1/4 in OAL x 4-1/4 in OAH
Premium line of professional quality bi-metal hole saws feature an M3 high-speed steel cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. Cutting depth is 1-1/2 in. Arbor required.
1/2" -ID 6203 BALL BEARING-GUL62031/22Z >
