Dodge® 131821 212 Normal Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5.4 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475119387
-
Manufacturer Part Number131821
-
CountryUSA
-
Load Capacity11791 lb Dynamic/8100 lb Static
-
Locking DeviceEccentric Collar
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed3500 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series212
-
Base Width2.37 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.88 to 7.94 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.4 in
-
Overall Length9-1/2 in
-
Overall Width3-1/16 in
- Precision-hardened inner ring
- Normal duty wide inner ring
- Dodge® dual guard land-riding, positive contact seal
- Stronger and flexible ball cage
- Simplified anti-rotation device
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100940005 |
| Motion Industries | 00557939 |
-
Alternative Part NumberP2B-SXR-207
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Specification Sheet
-
Warranty Information
-
Catalog
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
Dodge® 131821 212 Normal Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5.4 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Streamline® D 06050P Refrigeration Tubing, 3/8 in OD x 50 ft L, Coil, 0.32 in Thk Wall, Copper, Domestic
Streamline® Copper Tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline® Nitrogenized® ACR Copper Tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline® Refrigeration Service Tube is of a consistent dead soft temper, bright, thoroughly dried/dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
RIDGID® 34360 Wheel Screw, For Use With: Model 30 Tubing Cutter
RIDGID® 34360 Wheel Screw, For Use With: Model 30 Tubing Cutter
MasterDrive 3535-1.11/16 3535 3 Socket Tapered Bushing, 1.68 in Dia Bore, 4.83 in Dia Barrel, 5 in OAL, Cast Iron
TB (Taped Lock Style) Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design without flanges and utilize screws to tighten on the shaft. Their compact design makes them convienent in many applications that are space-constrained. Each TB Bushing size is produced in a number of different finished bore options that include a keyway, as well as a minimum plain bore option. This allows users flexibility when using TB style sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
