Sealmaster 1-11/16"-ID TRB CARTRIDGE BEARINGS SEA RCI-111
SealmasterĀ® 550101 RCI Mounted Tapered Roller Insert Only, 1.688 in Dia Bore, 3.437 in OD, 3.38 in W
-
BrandSealmasterĀ®
-
UPC662288479390
-
Manufacturer Part Number550101
-
CountryUSA
-
Cage MaterialSteel
-
Temperature Rating-20 to 220 deg F
-
FinishUncoated
-
Maximum Speed3000 rpm
-
Width3.38 in
-
SeriesRCI
-
Bearing Material52100 Steel
-
Outside Diameter3.437 in
-
Bore Diameter1.688 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
-
Alternative Part NumberRCI 111
-
UNSPSC31171536
-
Package DescriptionEACH
-
WarrantyLimited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
SealmasterĀ® 550101 RCI Mounted Tapered Roller Insert Only, 1.688 in Dia Bore, 3.437 in OD, 3.38 in W
TAPERED ROLLER BEARING CONES-TPR25580 >
GatesĀ® Power Transmission PowerGripĀ® HTDĀ® P32-5M-15AL Sprocket, 1/4 to 15/16 in Rough Stock Bore, 1.96 in OD, 32 Grooves, 2.005 in Dia Pitch, 0.547 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
MORSEĀ® 13110 1333 General Purpose Jobber Length Drill Bit, 8 mm Drill - Metric, 0.315 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSEĀ® 13110 1333 General Purpose Jobber Length Drill Bit, 8 mm Drill - Metric, 0.315 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSEĀ® 13128 1333 General Purpose Jobber Length Drill Bit, 9.5 mm Drill - Metric, 0.374 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSEĀ® 13128 1333 General Purpose Jobber Length Drill Bit, 9.5 mm Drill - Metric, 0.374 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSEĀ® 96200 4599G Center Cutting Long Length Single End End Mill, 3/16 in Dia Cutter, 1-1/4 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, TiN Coated
MORSEĀ® 96200 4599G Center Cutting Long Length Single End End Mill, 3/16 in Dia Cutter, 1-1/4 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, TiN Coated
