Sealmaster 1-1/4"-ID TRB CARTRIDGE BEARINGS SEA RCI-104
Sealmaster® 550096 RCI Mounted Tapered Roller Insert Only, 1-1/4 in Dia Bore, 2-1/2 in OD, 2.78 in W
-
BrandSealmaster®
-
UPC662288479345
-
Manufacturer Part Number550096
-
CountryUSA
-
Cage MaterialSteel
-
Temperature Rating-20 to 220 deg F
-
FinishUncoated
-
Maximum Speed4000 rpm
-
Width2.78 in
-
SeriesRCI
-
Bearing Material52100 Steel
-
Outside Diameter2-1/2 in
-
Bore Diameter1-1/4 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
-
Alternative Part NumberRCI 104
-
UNSPSC31171536
-
Package DescriptionEACH
-
WarrantyLimited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® 550096 RCI Mounted Tapered Roller Insert Only, 1-1/4 in Dia Bore, 2-1/2 in OD, 2.78 in W
This charger is a four-port fast charger that charges 12V MAX, 20V MAX, and FLEXVOLT 20V/60V MAX batteries at the same time. This fast charger quickly charges a 4.0Ah 20V MAX battery in 40 minutes, and a 6.0Ah 20V MAX battery in 60 minutes. It is also designed to fit our Tool Connect Tag, and is ToughSystem compatible.
72892 Cup Brush, Cable Crimped Wire, Industrial Pro, 4" X .009 Wire With 5/8" -11 M14x2.0 Arbor And Protective
CUP BRUSH, CABLE CRIMPED WIRE, INDUSTRIAL PRO, 4" X .009 WIRE WITH 5/8" -11 M14X2.0 ARBOR AND PROTECTIVE GUARD-FOR72892 >
HCI Preferred Supplier 940180 Ball Valve, 3 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940180 Ball Valve, 3 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
IKO LRB141820 Inch Series Inner Ring With Oil Groove, 7/8 in ID x 1-1/8 in OD, 32 mm OAW, For Use With BR182620 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
1-1/4" X 24" S/S KEYED SHAFT - FLS11/4X2SS>
