Sealmaster 4"-ID SPH/OD BB INSERT BEARINGS SEA 3-4
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000908
-
Manufacturer Part Number700102
-
CountryUSA
-
Load Capacity29905 lb Dynamic/23553 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed1700 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width4-5/8 in
-
Bearing MaterialSteel
-
Outside Diameter7.4803 in
-
Bore Diameter4 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-4
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Leviton® ML3-C Cable Mount Non-Grounding Locking Connector, 125/250 VAC, 15 A, 3 Poles, 3 Wires, Black/White
30-AMP FUSES
MORSE® 44596 4582 Center Cutting Double End Regular Length End Mill, 1 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 1 in Dia Shank, 6-3/8 in OAL, Bright
1-1/4" FEMALE PIPE THREAD RESTRICT PRT BALL VALVE-NIBT58011/4 >
A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 14" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
JAS140XL037 >
