Browning 2-3/16"-ID FL/OD INSERT BEARINGS BRW VER-235
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289859757
-
Manufacturer Part Number765340
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeStandard Duty Straight Bore
-
Seal MaterialRubber
-
Width2.188 in
-
SeriesVER 200
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter4.188 in
-
Bore Diameter2.188 in
- Single setscrew locking
- Single lip contact seal
- Zone hardened inner race
- Browning® VER bearings have the part number laser marked on the inner ring for easy verification of the part number during installation and for replacement
- Cylindrical outer diameter
- Relube through groove in outer diameter
-
Alternative Part NumberVER-235
-
UNSPSC31171504
-
Warranty1 Year
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
36" HANDLE MAGNETIC PICK-UP TOOLS-JWH351814>
HCI Preferred Supplier 540546 Adapter, 1/4 x 3/8 in Nominal, MPT x FPT End Style, Steel
HCI Preferred Supplier 540546 Adapter, 1/4 x 3/8 in Nominal, MPT x FPT End Style, Steel
Milwaukee® 49-59-2175 Annular Cutter, 1-3/4 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
1-GRV A OR B-BELT 3/4"-ID SHEAVES IDC BK-055-7/8
1-GROOVE A OR B-BELT 7/8"-ID SHEAVE
Hougen® 12244 12000 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
