Sealmaster 1"-ID SPH/OD SKWEZ INSERT BEARINGS SEA 2-1-T
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461029091
-
Manufacturer Part Number705311
-
CountryUSA
-
Load Capacity2801 lb Dynamic/1651 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed9000 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width1-7/16 in
-
Bearing MaterialSteel
-
Outside Diameter2.0472 in
-
Bore Diameter1 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Skwezloc® is a concentric locking collar clamp design that results in near perfect concentricity of the shaft to the bearing bore and maintains near perfect ball path roundness
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-1T
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Koyo M88010 Type-TS Cup, 2-11/16 in OD, 11/16 in W Cup, 7/8 in W Bearing, 0.06 in Max House Fillet Radius
FYH® NA206 20 NA Series Cylindrical Insert Bearing, 1-1/4 in Dia Bore, 1.9 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® NA206 20 NA Series Cylindrical Insert Bearing, 1-1/4 in Dia Bore, 1.9 in W, 19.5 kN Dynamic/11.3 kN Static Load
Hougen® 10534 Pilot, For Use With Rotabroach® 12000 Series 1/2 to 11/16 in (13 to 18 mm) Annular Cutter, Steel
7/8" X 4.25" X 18" DRILL STEEL-TAM4401451H >
Morse® AV26 Master Cobalt® Heavy Duty Hole Saw, 1-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
