Browning 1-1/4"-ID SPH/OD INSERT BEARINGS BRW VE-120-S
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289529230
-
Manufacturer Part Number767310
-
CountryUSA
-
Load Capacity4381 lb Dynamic/2567 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeLight Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width1-27/64 in
-
SeriesVE 100
-
Bearing MaterialSteel
-
Outside Diameter2.4409 in
-
Bore Diameter1-1/4 in
- Eccentric locking design incorporates a precision eccentric collar to mate with the inner ring extension for shaft hold
- Positive contact molded nitrile rubber single lip contact seal
- An anti-rotation rivet prevents outer ring creep or rotation within the housing thru hardening inner race
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outside diameter
- Without Snap Ring
-
Alternative Part NumberVE-120S
-
UNSPSC31171537
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
BBI 847455 Partially Threaded Cap Screw, 5/8-11, 6-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847455 Partially Threaded Cap Screw, 5/8-11, 6-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
HCI Preferred Supplier 36164 Ball Check Grease Fitting, 3/16 in Thread, 0.52 in OAL, Steel, FTG GZD-3
HCI Preferred Supplier 36164 Ball Check Grease Fitting, 3/16 in Thread, 0.52 in OAL, Steel
5-LBS #E-6011 3/32" WELDING ROD-MAQM55700 >
BANDED V-BELT-JAS12RB115>
