INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
-
BrandDodge®
-
UPC782475892617
-
Manufacturer Part Number128661
-
CountryUSA
-
Load Capacity9755 lb Dynamic/6588 lb Static
-
Temperature Rating250 deg F
-
FinishUncoated
-
Maximum Speed5300 rpm
-
TypeMedium Duty
-
Width2-1/4 in
-
Series211
-
Bearing MaterialCast Iron
-
Outside Diameter3.937 in
-
Bore Diameter2 in
- Precision-hardened and honed inner and outer rings
- New rugged housing design
- Normal duty wide inner ring
- D-LOK® locking mechanism
- Dual guard positive contact seal including rubberized flingers
- Stronger and flexible ball retainer
- Simplified anti-rotation device
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100738377 |
-
Alternative Part NumberINS-DLM-200
-
UNSPSC31171536
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
Gates® Power Transmission Poly Chain® HTD® PC2100-14M-85 Synchronous Belt, 85 mm W, 2100 mm OAL, 14 mm Pitch, 150 Teeth, Polyurethane
Gates original HTD™ tooth profile combined with Poly Chain™ belt construction.
FC-IP-307R Dodge® 069828 307 Imperial Non-Expansion Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 5.3 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 8-3/4 in OAL/Dia
FC-IP-307R Dodge® 069828 307 Imperial Non-Expansion Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 5.3 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 8-3/4 in OAL/Dia
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® 3748829 Taper Lock Bushing, 1-1/4 in Dia Bore, 1-7/8 in Dia Barrel, 1-1/2 in OAL, Steel
Browning® 3748829 Taper Lock Bushing, 1-1/4 in Dia Bore, 1-7/8 in Dia Barrel, 1-1/2 in OAL, Steel
