FYH® UCX09 28 UCX Cylindrical Pillow Block Unit, 45 mm Dia Bore, 2-5/8 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® UCX09 28 UCX Cylindrical Pillow Block Unit, 45 mm Dia Bore, 2-5/8 in W, 35.1 kN Dynamic/23.3 kN Static Load
-
BrandFYH®
-
Manufacturer Part NumberUCX09 28
-
CountryUSA
-
Load Capacity35.1 kN Dynamic/23.3 kN Static
-
TypeCylindrical
-
Width2-5/8 in
-
SeriesUCX
-
Bore Diameter45 mm
Recently Viewed
FYH® UCX09 28 UCX Cylindrical Pillow Block Unit, 45 mm Dia Bore, 2-5/8 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® UCX09 28 UCX Cylindrical Pillow Block Unit, 45 mm Dia Bore, 2-5/8 in W, 35.1 kN Dynamic/23.3 kN Static Load
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
Bussmann AGC-4 Small Dimension Fast Acting Fuse, 4 A, 250 VAC, 200 A/10 kA Interrupt, Cylindrical Body
Bussmann AGC-4 Small Dimension Fast Acting Fuse, 4 A, 250 VAC, 200 A/10 kA Interrupt, Cylindrical Body
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
FYH® UCPAN205 16 UCPAN Normal Duty Pillow Block Unit, 1 in Dia Bore, 2 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 2-3/4 in OAL 2-3/4 in OAH
FYH® UCPAN205 16 UCPAN Normal Duty Pillow Block Unit, 1 in Dia Bore, 2 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 2-3/4 in OAL 2-3/4 in OAH
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
