RBC Bearings 7/8" HEAVY CAM FOLLOWER RBC H-28-L
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400005832
-
Manufacturer Part NumberH28L
-
CountryUSA
-
Load Capacity1800 lb Dynamic/4150 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length3/8 in
-
Thread Size7/16-20 UNF-2A
-
Maximum Speed5000 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter7/8 in
-
Roller MaterialChrome Steel
-
Roller Width1/2 in
-
Head TypeSlotted
-
SeriesH-L Series
-
Stud Diameter7/16 in
-
Stud Length7/8 in
-
Stud MaterialChrome Steel
-
Stud TypeHeavy Duty
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Heavy stud cam followers are designed to provide additional stud strength for applications with high loading or shock loads
- Double sealed to keep grease in and contaminants out
- Screwdriver slots
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
1/4" AIR TOOL SWIVEL-DXND344U >
Milwaukee® 49-56-7000 Small Thread Basic Hole Saw Arbor, Up to 1-3/16 in Arbor, 7/16 in, Hardened Steel
This Milwaukee hole saw arbor has a 7/16 in. hex shank for greater gripping capability in the chuck. It can be used in 1/2 in. capacity drills and larger. The arbor has a 1/2 - 20 thread and can be used on hole saws from 9/16 in. to 1-3/16 in.. it can be used with 49-56-8000, 49-56-8002 and 49-56-8005 pilot bits. Pilot bit 49-56-8000 is supplied with this arbor for use on wood and metal. One arbor and pilot per package.
Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Gates® Power Transmission Hi-Power® II CC105 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 109 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission Hi-Power® II C97 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 101 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
