Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
-
BrandSmith Bearing®
-
UPC651041040632
-
Manufacturer Part NumberHR-1/2-XB
-
CountryUSA
-
Load Capacity970 lb Dynamic/1590 lb Static
-
Thread Length1/4 in
-
Thread Size1/4-28 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter1/2 in
-
Roller Material52100 Steel
-
Roller Width3/8 in
-
Head TypeHex Socket
-
SeriesHR-XB
-
Stud Diameter1/4 in
-
Stud Length5/8 in
-
Stud TypeHeavy
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 11Y046 |
-
UNSPSC31171530
-
Warranty12 months
-
Full Engineering Drawing
-
Catalog
Recently Viewed
Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® CR-1-X Cylindrical Stud Type Needle Bearing Cam Follower, 1 in Dia x 5/8 in W Roller, 7/16 in Dia x 1 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Gates® Power Transmission A39 Hi-Power® II 9002 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 41 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Hi-Power® II A66 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 68 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1760-8MGT-20 9232 Synchronous Belt, 220 Teeth, 8 mm Pitch, 1760 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
