Smith Bearing® CR-1-X Cylindrical Stud Type Needle Bearing Cam Follower, 1 in Dia x 5/8 in W Roller, 7/16 in Dia x 1 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
-
BrandSmith Bearing®
-
UPC651041038097
-
Manufacturer Part NumberCR-1-X
-
CountryUSA
-
Load Capacity3030 lb Dynamic/3100 lb Static
-
Thread Length1/2 in
-
Thread Size7/16-20 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter1 in
-
Roller Material52100 Steel
-
Roller Width5/8 in
-
Head TypeScrewdriver Slot
-
SeriesCR-X
-
Stud Diameter7/16 in
-
Stud Length1 in
-
Stud MaterialCarbon Steel
-
Stud TypeStandard
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 13W687 |
-
UNSPSC31171530
-
Warranty12 months
-
Full Engineering Drawing
-
Catalog
Recently Viewed
Smith Bearing® CR-1-X Cylindrical Stud Type Needle Bearing Cam Follower, 1 in Dia x 5/8 in W Roller, 7/16 in Dia x 1 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
LockNLube® GC81042 GC Coupler, For Use With Shielded PTO Shafts, Axles, Harvester Heads, U Joints and other Recessed Grease Fittings, 1/8 in NPTF, 10000 psi Pressure, 5/8 in Dia, Steel/Nitrile Rubber, Silver
Rated to 10000 PSI, Locks on, stays on. Does not leak once locked on. Hands free does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure. No more broken Zerks, Over 3.5 in of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings. Fits all standard Grease Guns 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.Includes rebuild kit. Easily replace seal and jaws without replacing the coupler. Old/retired SKUs for this product include: GCXL, GC81032
The ultimate adhesive adheres anything to anything with a permanent, strong, waterproof bond. Requires no mixing and is sandable, paintable and stainable. Best on stone, metal, ceramic, wood, foam, glass and more, Clean up mineral spirits or acetone when glue is wet, sand and scrape when glue is dry. Yellow color when dry.
3/32" X 5/8" WOODRUFF KEY-MED1004 >
Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
8 THHN WHITE ELECTRICAL WIRE 500' ROLL - ALE8THHNWHT >
