Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
-
BrandSmith Bearing®
-
UPC651041005587
-
Manufacturer Part NumberCR-7/8-XB
-
CountryUSA
-
Load Capacity2140 lb Dynamic/2200 lb Static
-
Thread Length3/8 in
-
Thread Size3/8-24 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter7/8 in
-
Roller Material52100 Steel
-
Roller Width1/2 in
-
Head TypeHex Socket
-
SeriesCR-XB
-
Stud Diameter3/8 in
-
Stud Length7/8 in
-
Stud MaterialCarbon Steel
-
Stud TypeStandard
-
UNSPSC31171530
-
Warranty12 months
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Smith Bearing® CR-3/4-X Cylindrical Stud Type Needle Bearing Cam Follower, 3/4 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Smith Bearing® SMITH-TRAX® FCR-1-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 1-1/2 in Dia Roller, 1-3/16 in W Roller, 2-3/16 in Dia Flange, 5/8 in Dia Stud, 1-1/2 in L Stud
FCR Series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
Smith Bearing® CR-3/4-XBE Cylindrical Stud Type Needle Bearing Cam Follower With Eccentric Bushing, 3/4 in Dia x 1/2 in W Roller, 1/2 in Dia x 7/8 in L Stud, 52100 Steel Roller
A press fit eccentric sleeve provides correct alignment and adjustment without costly preparation of close tolerance mounting holes and members. Eliminate problems of clearances, preloading and wear compensation and assure load sharing in multiple cam follower applications. Offer two model are non-crowned outer race and crowned outer race.
United Abrasives-SAIT 70100 2A Premium Coated Flap Wheel, 3 in Dia, 1 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
United Abrasives-SAIT 70080 2A Premium Coated Flap Wheel, 3 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
