Loctite® 135381 271™ 1-Part High Strength Low Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
Loctite® 135381 271™ 1-Part High Strength Low Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
-
BrandLoctite®
-
UPC079340271319
-
Manufacturer Part Number135381
-
CountryUSA|Canada
-
Temperature Rating-65 to 300 deg F
-
Flash Point>199.94 deg F
-
FormLiquid
-
ColorRed
-
Type1-Part High Strength Low Viscosity
-
Viscosity Rating500 cPs
-
Container Size50 mL
-
Container TypeBottle
-
Applicable MaterialsMetal
-
Series271™
-
Curing Time24 hr
-
Setting Time10 min
-
Base TypeMethacrylate
-
Specific Gravity1.1
-
Drying Time10 min
- Anaerobic cure
- For fasteners up to 1 in dia
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5A231 |
| Grainger | 5A231 |
-
Alternative Part Number27131
-
UNSPSC31201701
-
Package Description1/PK
-
Standards/ApprovalsCFIA Approved|UL Listed|ASTM D5363 Group 2 Class 2 Grade 1|MIL-S-46163A Type I Grade K|OSHA 29 CFR 1910.1200|RoHS 2011/65/EU
-
SDS
Recently Viewed
Loctite® 135381 271™ 1-Part High Strength Low Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
Loctite® 135381 271™ 1-Part High Strength Low Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
Loctite® 88448 277™ High Strength Large Bolt Medium Viscosity Threadlocker, 50 mL Bottle, Liquid Form, Red
LOCTITE® 277 is a red, high strength, high viscosity, methacrylate-based thread locking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK32X7/8 >
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
1/4" X 4-1/2" Hex Head Zinc Lag Screws
Browning 21-TOOTH SDS #60-1 CHAIN SPROCKETS BRW H-60-SDS-21
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
