Permatex® 27150 High Strength Threadlocker, 50 mL Bottle, Liquid Form, Red
Permatex Red High Strength Threadlocker meets OEM specifications. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.
-
BrandPermatex®
-
UPC686226271501
-
Manufacturer Part Number27150
-
CountryCanada
-
Temperature Rating-65 to 300 deg F
-
Flash Point>93 deg C
-
FormLiquid
-
ColorRed
-
TypeHigh Strength
-
Viscosity Rating400 to 600 cPs
-
Container Size50 mL
-
Container TypeBottle
-
Applicable MaterialsMetal
-
Curing Time24 hr
-
Specific Gravity1.1
-
Drying Time25 min
- High strength thread locker for heavy duty applications 3/8 to 1 in
- especially well-suited for permanently locking studs and press fits
- Adds 3000 psi holding power on slip and press fit assemblies
- Replaces set screws and snap rings
- Locks against vibration loosening
- May require heat or special tools for removal
-
UNSPSC31201612
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D 5363 AN0321|OEM Specified|MIL-S-46163A Type II/ Grade K
-
SDS
Recently Viewed
Permatex Red High Strength Threadlocker meets OEM specifications. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.
Crosby® 1019613 G21030-1-3/8 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019613 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
Browning® PH9010 Taper Bore Bushing Kit, 3-15/16 in ID x 3-15/16 in OD Dia Bushing, For Use With TorqTaper® Plus Size 315SMTP Shaft Mount Speed Reducer, Ductile Iron
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
Duracell® MN1604B2 Non-Rechargeable Low Cost Zinc-Manganese Dioxide Battery, Zinc-Manganese Dioxide, 9 V DC, 580 mAh
Economical, general purpose 9 VAC alkaline battery with a high energy output they are reliable with a long shelf life, and good low temperature performance. Duracell Plus Power now has longer life compared to previous Duracell Plus batteries. This battery is ideal for everyday use such as smoke alarms remote controls etc.
Remke Tuff-Seal™ 7303-014R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 1.2 to 1.5 in Cable, For Use With 1-1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
.875" X 1.255" X .250" OIL SEAL-NAT254287>
