Loctite 50-ML #243 OIL RESIST THREADLOCKER LOC 24078
Loctite® 1329467 243™ Medium Strength Oil Tolerant Primerless Threadlocker, 50 mL Bottle, Liquid Form, Blue
-
BrandLoctite®
-
UPC079340438972
-
Manufacturer Part Number1329467
-
CountryUSA
-
Temperature Rating-65 to 300 deg F
-
Flash Point>199.94 deg F
-
FormLiquid
-
ColorBlue
-
TypeMedium Strength Oil Tolerant Primerless
-
Viscosity Rating1300 to 3000 cPs
-
Container Size50 mL
-
Container TypeBottle
-
Applicable MaterialsMetal
-
Series243™
-
Curing Time24 hr at 22 deg C (Full), 5 min at 22 deg C (Fix)
-
Setting Time10 min
-
Shear Strength1100 psi
-
Specific Gravity1.09
-
Drying Time5 min
- Tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids
- Primer less performance on both inactive and active metals
- Anaerobic curing method
- Resists acetone, B100 biodiesel, brake fluid, ethanol, leaded petrol
- Slightly soluble in water
- Not only works on active metals (e. G. Brass, copper) but also on passive substrates such as stainless steel and plated surfaces
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LM501329467 |
-
UNSPSC31201701
-
Package Description1/PK
-
Standards/ApprovalsNSF/ANSI 61|NSFA Certified|RoHS Compliant
Recently Viewed
Loctite® 1329467 243™ Medium Strength Oil Tolerant Primerless Threadlocker, 50 mL Bottle, Liquid Form, Blue
Milwaukee® 49-57-1252 Tang Drive Annular Cutter, 1-1/4 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-1/4 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-1377 Tang Drive Annular Cutter, 1-3/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-3/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Energizer® L522BP Multi-Purpose Battery, Lithium-Manganese Dioxide, 750 mAh Nominal, 9V
Nothing outlasts Energizer Ultimate Lithium 9V Batteries. These Energizer batteries last up to 20 percent longer in toys versus Energizer MAX batteries, and they feature leak resistant construction and performance in extreme temperatures ranging from -40 F to 140 F. Use these 9 volt lithium batteries to power toys and games, or use them to provide up to 10 year battery backup in AC powered smoke detectors. Energizer 9 volt Ultimate Lithium batteries weigh 25 percent less than standard alkaline batteries. They also hold power for up to 10 years in storage, letting you keep a ready supply of backup 9 volt batteries. To ensure your favorite devices operate at their peak performance, depend on Energizer lithium batteries for work, play and home.
Milwaukee® 49-57-1062 Annular Cutter, 1-1/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-1/16 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-1/16 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
27084 ANTI-SEIZE AST-RTV White Silicone Adhesive/Sealant is a 100% RTV silicone gasket maker and multi-purpose sealant packaged in a 6.75 oz
8-OZ AEROSOL RTV 100% WHITE SILICONE ADHESIVE & SEALANT-ANT27084 >
