Devcon® FasMetal™ 10 19770 2-Component HVAC Repair Kit, 6.5 oz Tube, Gray/White, 16 hr Curing
Devcon® FasMetal™ 10 19770 2-Component HVAC Repair Kit, 6.5 oz Tube, Gray/White, 16 hr Curing
-
BrandDevcon®
-
UPC078143197703
-
Manufacturer Part Number19770
-
CountryCanada
-
Temperature Range250 deg F
-
For Use OnAluminum and Other Metal, Ceramic, Wood, Concrete and Glass
-
ColorGray/White
-
Type2-Component
-
CompositionPart A: Bisphenol A Diglycidyl Ether Resin , Aluminum Flake, Calcium Carbonate, Synthetic Amorphous Silica, Crystalline Silica; Part B: Barium Sulfate, Polyamide of Tall-Oil Fatty Acid Dimers and Tetraethylenepentamine, Tris-2,4,6-(Dimethylaminomethyl)Phenol, Dimer/TOFA, Reaction Products with TETA, Calcium Carbonate, Kaolin, Triethylenetetramine, Synthetic Amorphous Silica, Crystalline Silica, Tetraethylenepentamine
-
Mixing Ratio1:1
-
Container Size6.5 oz
-
Container TypeTube
-
Curing Time16 hr
-
Base TypeEpoxy
- Repairs coils in compressors
- Hardens to a rigid bond that can be ground, drilled or tapped
- Fills voids or porosity in aluminum castings
- Cured 7 days at 75 deg F
- Recoat time 10-12 hrs
- Part A: resin part B: Hardener
-
UNSPSC31201607
-
Standards/ApprovalsASTM D 695/2240/150/638/2566/1002/149/696/790/177|OSHA 29 CFR 1910.133
-
SDS
Recently Viewed
Devcon® FasMetal™ 10 19770 2-Component HVAC Repair Kit, 6.5 oz Tube, Gray/White, 16 hr Curing
Devcon® FasMetal™ 10 19770 2-Component HVAC Repair Kit, 6.5 oz Tube, Gray/White, 16 hr Curing
Permatex® 27010 Gel Twist™ High Strength Threadlocker, 10 g Container Tube Container, Gel Form, Red
Permatex® high strength threadlocker red gel is a high strength anaerobic threadlocking gel conveniently packaged in a new Gel Twist™ or Gel Squeeze™ applicator. The product, like its liquid counterpart, is a single component, anaerobic gel that cures when confined in the absence of air between close fitting metal surfaces, ideal for all 3/8 to 1 in (10 to 25 mm) and greater diameter threaded assemblies. Excellent chemical resistance and temperature resistance range of -65 to 300 deg F (-54 to 149 deg C). The assembly may require the use of heat to remove bolts. NSF Nonfood Components Program Listed (P1) (135870).
United Abrasives-SAIT 71057 2A Premium Coated Flap Wheel, 2-1/2 in Dia, 1 in W Face, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
Martin SF 2 7/16 Standard QD Bushing, 2-7/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2.063 in OAL, Ductile Iron
QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.
Worms and worm gears are used to power right angle, non-intersecting shafts. In normal applications the worm gear is driven by the worm. The most popular use of worms and worm gears is in applications where high ratio speed reduction is desired in a relatively limited space. They are also used in applications where high resistance to the worm gear shaft reversing and driving back through the worm is desired.
Permatex® 26250 Permanent Strength Threadlocker, 50 mL Bottle, Liquid Form, Red
Permatex Red High Strength 262 Threadlocker meets OEM specifications. It is an all-purpose high strength threadlocker ideal for fasteners 3/8" to 1" (10mm to 25mm) in size. Designed for securing parts that must withstand heavy shock, vibration or extreme chemical or environmental conditions. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Localized heating and hand tools are required to separate parts. Conforms to ASTM D5363 AN0331 (Mil-S-46163A, Type II, Grade O).
