Oatey® 30818 All Purpose Medium Body Solvent Cement, 4 oz Container, Milky Clear
Oatey® All-Purpose ABS, PVC and CPVC Medium Bodied Fast Set Clear Cement is recommended for potable water, pressure pipe, conduit and DWV applications. It can be used on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
Manufacturer Part Number30818
-
CountryUSA
-
Temperature Rating40 to 110 deg F
-
ColorMilky Clear
-
TypeAll Purpose Medium Body
-
CompositionFuran, Tetrahydro, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Ethene, Chloro-Homopolymer, Chlorinated, Silica, Amorphous, Fumed
-
Container Size4 oz
-
Curing Time2 hr
-
Setting Time5 to 6 min
-
Odor/ScentSolvent
-
Suitable For Use WithUpto 12 in Dia ABS, PVC, CPVC Pipe and Fittings
- Medium viscosity easily fills gaps and provides more working time
- Cement appears off-white in the can but dries clear when applied in a thin film
- 5 to 6 min at 30 to 50 deg F/3 to 4 min 50 to 70 deg F/1 to 2 min at 70 to 90 deg F setting
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | O30818 |
-
UNSPSC31201617
-
Package Description24/CTN
-
Standards/ApprovalsASTM D2564|ASTM D2235|ASTM F493|California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and Various Environmental Requirements
-
Warranty1 Year Limited
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
Recently Viewed
Oatey® 30818 All Purpose Medium Body Solvent Cement, 4 oz Container, Milky Clear
Oatey® All-Purpose ABS, PVC and CPVC Medium Bodied Fast Set Clear Cement is recommended for potable water, pressure pipe, conduit and DWV applications. It can be used on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
DeWALT® Power-Stud® 07338-PWR Wedge Expansion Anchor, 5/8 in Dia, 8 1/2 in OAL, 7 in L Thread, 304 Stainless Steel
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
Browning® 767743 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-3/16 in Dia Bore, 4-3/8 to 5-1/16 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5-15/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 1004654 Type D3 Multiple Sheave, 1/2 to 2-5/8 in QD® Bore, 7.68 in OD, 3 Grooves, 7.2 in (A)/7.7 in (B) Dia Pitch, 2-7/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 767319 VPE 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/2 in Dia Bore, 4-7/8 to 5-7/8 in L Bolt Center-to-Center, 2 in Base to Bore Centerline, 7-1/8 in OAL x 4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767747 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-3/8 to 5-1/16 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5-15/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
