Oatey® Rain-R-Shine® 30893 Low VOC Medium Body PVC Cement, 16 oz Container, Blue
Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
UPC038753308937
-
Manufacturer Part Number30893
-
CountryUSA
-
Temperature Rating40 to 110 deg F
-
ColorBlue
-
TypeLow VOC Medium Body
-
CompositionFuran, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed
-
Container Size16 oz
-
Curing Time2 hr
-
Setting Time4 to 5 min
-
Odor/ScentSolvent
-
Suitable For Use WithUpto 6 in Dia PVC Pipe and Fittings
- Very fast setting for quick pressurization and quick installation
- Recommended application temperature of 40F to 110F/4C to 43C
- Very fast setting "Hot" cement formulated for wet conditions and/or quick pressurization and fast installation
- No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit
- 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
- Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
- 7.83 +/- 0.2 lbs./gallon density
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | O30893 |
-
UNSPSC31201617
-
Package Description24/CTN
-
Standards/ApprovalsASTM D2564|IAPMO Listed|NSF 61 for PW|DWV and Sewer Waste
-
Specification Sheet
-
SDS
-
Catalog
Recently Viewed
Oatey® Rain-R-Shine® 30893 Low VOC Medium Body PVC Cement, 16 oz Container, Blue
Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Rust-Oleum® V2192838 V2100 System Enamel Spray Paint, 15 oz Container, Liquid Form, White, 12 to 20 sq-ft/can Coverage
Rust-Oleum High Performance V2100 System Rust Preventive Enamel Spray Paint features an advanced, fast-drying formula that provides excellent protection from rust and corrosion. This industrial application enamel is equipped with a high-output spray tip for faster project completion. Ideal for use on structural steel, equipment, machinery, storage tanks, handrails and more.
MasterDrive Q2-2.1/8 Q2 Series Double Split Tapered Bushing, 2.12 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
HCI Preferred Supplier 940461 3-Way Ball Valve, 1/2 in Nominal, FIPT End Style, Forged Brass Body, Full Port, PTFE Seal/PVC Cover/NBR O-Ring Softgoods
HCI Preferred Supplier 940461 3-Way Ball Valve, 1/2 in Nominal, FIPT End Style, Forged Brass Body, Full Port, PTFE Seal/PVC Cover/NBR O-Ring Softgoods
MasterDrive Q2-2.5/16 Q2 Series Double Split Tapered Bushing, 2.31 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Dottie® 247 Marking Paint, 20 oz Container, Fluorescent Orange, 420 ft Coverage, 45 min Curing
Dottie® 247 Marking Paint, 20 oz Container, Fluorescent Orange, 420 ft Coverage, 45 min Curing
