Gator® GatorGrit 3312 Coated Sanding Sheet, 11-1/4 in L x 4-1/4 in W, 150 Grit, Silicon Carbide Abrasive, Paper Backing
Gator® GatorGrit 3312 Coated Sanding Sheet, 11-1/4 in L x 4-1/4 in W, 150 Grit, Silicon Carbide Abrasive, Paper Backing
-
BrandGator®
-
UPC082354042615
-
Manufacturer Part Number3312
-
CountryUSA
-
Grit150
-
Abrasive MaterialSilicon Carbide
-
Applicable MaterialsDrywall
-
Width4-1/4 in
-
Backing MaterialPaper
-
Backing WeightD-Weight
-
Length11-1/4 in
| Cross-Reference Number |
|---|
| 339792 |
-
UNSPSC31191500
-
Package Description250 BLK
Recently Viewed
Gator® GatorGrit 3312 Coated Sanding Sheet, 11-1/4 in L x 4-1/4 in W, 150 Grit, Silicon Carbide Abrasive, Paper Backing
Gator® GatorGrit 3312 Coated Sanding Sheet, 11-1/4 in L x 4-1/4 in W, 150 Grit, Silicon Carbide Abrasive, Paper Backing
Dichtomatik N70435 O-Ring, 435 Dash Number, 5.725 in ID x 6.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, DELRIN and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
XXXXL TYVEK COVERALLS W/ELASTIC AT WRISTS & ANKLES
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Browning® 767455 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 1-1/4 in Dia Bore, 2.8346 in OD, 1-11/16 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
