Black&Decker 4-1/2" 40-G 7/8"-ARBOR FLAP DISCS BD- DW-A-8206
Innovative zirconia grit gives DeWALT® Type 29 flap discs the power to remove material 3 times fast than fiber resin metal sanding discs. Type 29 fiberglass backing provides a grinding angle of 20 to 25 deg. A premium abrasive cloth offers a life up to 15 times long than fiber resin metal sanding discs.
-
BrandDeWALT®
-
UPC885911266673
-
Manufacturer Part NumberDWA8206
-
CountryUSA
-
Center Hole Size7/8 in
-
Maximum Speed13300 rpm
-
ColorDark Gray/Yellow
-
TypeContaminant-Free High Performance
-
GradeCoarse
-
Grit40
-
Abrasive MaterialZirconia Alumina
-
Backing MaterialFiberglass
-
Disc Diameter4-1/2 in
-
Disc TypeType 29
- Zirconia grit enables 3X faster material removal than fiber resin metal sanding discs
- Premium abrasive cloth provides up to 15X longer life than fiber resin metal sanding discs
- Type 29 fiberglass backing provides grinding angle of 20 to 25 deg
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 120W37 |
-
UNSPSC31191506
-
Package DescriptionEACH
Recently Viewed
Innovative zirconia grit gives DeWALT® Type 29 flap discs the power to remove material 3 times fast than fiber resin metal sanding discs. Type 29 fiberglass backing provides a grinding angle of 20 to 25 deg. A premium abrasive cloth offers a life up to 15 times long than fiber resin metal sanding discs.
35-B-40-F-5/8 40 Tooth Sprockets For #35
40 TOOTH SPROCKETS FOR #35 CHAIN-IDC35B40F5/8 >
FYH® SAA207 23FP7 SAA Cylindrical Ball Bearing Insert, 1-1/4 in Dia Bore, 2.83 in OD, 1.53 in W, 25.7 kN Dynamic/15.4 kN Static Load
FYH® SAA207 23FP7 SAA Cylindrical Ball Bearing Insert, 1-1/4 in Dia Bore, 2.83 in OD, 1.53 in W, 25.7 kN Dynamic/15.4 kN Static Load
United Abrasives-SAIT 80605 DA-F Handy Utility Coated Handy Roll, 50 yd L x 1 in W, 60 Grit, Medium Grade, Aluminum Oxide Abrasive, Cloth Backing
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
MINI HAND CHAIN HOIST HAS A 500LB CAPACITY, SILVER FINISH, STEEL & ALUMINUM CONSTRUCTION-HRHCX00310 >
