Dremel® 83702 Grinding Stone, 1/8 in Dia, 0.125 in Dia Shank
Dremel® 83702 Grinding Stone, 1/8 in Dia, 0.125 in Dia Shank
-
BrandDremel®
-
Manufacturer Part Number83702
-
CountryUSA
-
Maximum Speed35000 rpm
-
Abrasive MaterialSilicon Carbide
-
Head Diameter1/8 in
-
Shank Diameter0.125 in
| Cross-Reference Number |
|---|
| 332633 |
Recently Viewed
Dremel® 83702 Grinding Stone, 1/8 in Dia, 0.125 in Dia Shank
JOHN DEERE TERRACE WHEEL 8X2-MED72099 >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA88K>
Sloan® Royal® 3012636 186 Single-Flush Flushometer, 1 gpf Flush Rate, 3/4 in IPS Inlet, 3/4 in Spud, Polished Chrome, Domestic
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB50K>
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
