MORSE® 59781 5970 Premium Carbide Burr, Flame Head, 5/16 in Dia Head, 3/4 in L of Cut, 2 in OAL, Double Cut
MORSE® 59781 5970 Premium Carbide Burr, Flame Head, 5/16 in Dia Head, 3/4 in L of Cut, 2 in OAL, Double Cut
-
BrandMORSE®
-
UPC686125597818
-
Manufacturer Part Number59781
-
CountryUSA
-
Maximum Speed38000 rpm
-
TypePremium
-
Head CoatingBright
-
Head Diameter5/16 in
-
Head MaterialSolid Carbide
-
Head ShapeFlame
-
Applicable MaterialsBrass, Cast Iron and Copper
-
Series5970
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Included Angle45 deg
-
Industry SpecificationSH-2
-
Length of Cut3/4 in
-
Overall Length2 in
- Design reduces the pulling action, reduces size of chips
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MORSE® 59781 5970 Premium Carbide Burr, Flame Head, 5/16 in Dia Head, 3/4 in L of Cut, 2 in OAL, Double Cut
MORSE® 59781 5970 Premium Carbide Burr, Flame Head, 5/16 in Dia Head, 3/4 in L of Cut, 2 in OAL, Double Cut
ALL PURPOSE PUSH BROOM WITH HANDLE-JWH616117 >
ELECTRIC FENCE TESTER-JWH715195 >
1" -IDX10' STRAIGHT LENGTH. 99% PURE COPPER TUBING. TYPE M WATER PIPE APPLY TO THE ID MEASUREMENT. TYPE M COPPER IS THIN WALL, FOR REGULAR PRESSURE GENERAL PLUMBING AND HEATING-JWH416767 >
Heavy-duty foaming detergent coil cleaner in an aerosol can. Non-flammable and water-based with no chlorinated solvents. Blasting foam stream reaches into tight areas for maximum cleaning. The foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils.
FEATURES
Heavy duty foaming detergent coil cleaner in an aerosol can
Non-flammable and water-based with no chlorinated solvents
Blasting foam stream reaches into tight areas for maximum cleaning
The foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils
Milwaukee® 49-57-8201 Quick-Change Hole Saw Plate Cutter, 11/16 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
