MORSE® M-BRAD™ 59511 5970 Premium Wheel Brush, Flat End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
MORSE® M-BRAD™ 59511 5970 Premium Wheel Brush, Flat End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
-
BrandMORSE®
-
UPC686125595111
-
Manufacturer Part Number59511
-
CountryUSA
-
Maximum Speed36000 rpm
-
TypePremium
-
Head CoatingBright
-
Head Diameter1/2 in
-
Head MaterialSolid Carbide
-
Head ShapeCylindrical
-
Applicable MaterialsCast Iron, Ferrous Metals and Steel
-
Series5970
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Included Angle45 deg
-
Industry SpecificationSA-5
-
End TypeFlat
-
Length of Cut1 in
-
Overall Length2-1/4 in
- Design reduces the pulling action, reduces size of chips
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MORSE® M-BRAD™ 59511 5970 Premium Wheel Brush, Flat End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
MORSE® M-BRAD™ 59511 5970 Premium Wheel Brush, Flat End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
RIDGID® 72922 VT2514 Floor Brush, 2-1/2 in L
ASP-175-2-SSS Industry Standard Clamping Collar, 2-Piece Construction, 1-3/4 in ID x 2-3/4 in OD x 11/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Wilton® WL9-14284 Classic 400 Regular Duty Drop Forged C-Clamp, 6 in D Throat, 2 to 10-1/8 in Jaw Opening, 3/4 in Screw
Wilton Classic 400 Series C-Clamps are ideal for steel fabrication, industrial maintenance, and repair operations. Each C-Clamp is drop forged and features an ACME rolled spindle with Black Oxide Coating, replaceable Perma-Pads® and a v-grooved anvil for secure holding of all materials.
Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
