Southwire® Romex® SIMpull® 63949221 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 8 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
-
BrandSouthwire®
-
UPC032886263361
-
Manufacturer Part Number63949221
-
CountryUSA
-
Temperature Rating90 deg C
-
TypeType NM-B
-
Conductor Size8 AWG
-
Conductor TypeStranded Copper
-
Voltage Rating600 V
-
Amperage Rating40 A
-
Number of Conductors3
-
Insulation Material30 mil PVC
-
Jacket ColorBlack
-
Jacket Material30 mil Nylon
-
Strands7
-
Outside Diameter571 mil
-
Length25 ft
- Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C
- NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations
- Voltage rating for NM-B cable is 600 V
-
Alternative Part Number16733579
-
UNSPSC26121517
-
IDEA Index ID16733579
-
Standards/ApprovalsASTM B3/B8|Federal Specification A-A-59544|Green Specification|National Electrical Code NFPA 70|REACH Compliant|RoHS Compliant|UL 83/719
-
Warranty1 Year
-
Specification Sheet
Recently Viewed
Southwire® Romex® SIMpull® 63949221 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 8 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Littelfuse® POWR-GARD® LLNRK125 Current Limiting Time Delay Fuse, 125 A, 250 V AC/125 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
Littelfuse® LLNRK and LLSRK series POWR-PRO® fuses provide superior overload and short circuit protection for service entrance, main, feeder and general purpose branch circuits upto 600 A. LLNRK/LLSRK series fuses can be installed in existing Class H fuse blocks to upgrade systems containing lower interrupting rating Class H one-time or renewable fuses.
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
12/3 TWIST-LOCK "Y" ADAPTERS
Littelfuse® POWR-GARD® LLSRK1.25 Current Limiting Time Delay Fuse, 1.25 A, 600 V AC/300 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
Littelfuse® LLNRK and LLSRK series POWR-PRO® fuses provide superior overload and short circuit protection for service entrance, main, feeder and general purpose branch circuits upto 600 A. LLNRK/LLSRK series fuses can be installed in existing Class H fuse blocks to upgrade systems containing lower interrupting rating Class H one-time or renewable fuses.
Gardner Bender OX-100B Anti-Oxidant Compound, 1 oz Container Squeeze Tube Container, Semi-Solid Form, Gray, Specific Gravity: 1.37
Ox-Gard Anti-Oxidant Compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a twofold effect; it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard Anti-Oxidant Compound is manufactured with unique grease compounded from custom refined low Sulphur oil. The grease base ensures brush-ability over a wide temperature range, tenacious adherence to all surfaces, resistance to water wash out and the prevention of rust and corrosion. This makes the product easier and more reliable to use.
