Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
-
BrandWeller®
-
UPC037103062666
-
Manufacturer Part NumberPSI1
-
CountryUSA|Canada
-
TypeReplacement Single Flat
-
SeriesPSI
-
Specifications16.26 mm L x 0.8 mm W, 850 deg F Operating
-
Suitable For Use WithPSI100 Butane Soldering Iron
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5JH58 |
| Grainger | 5JH58 |
-
UNSPSC23271809
-
Package Description1/PK
-
Warranty1 Year
Recently Viewed
Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
Lift-All® Tuflex™ EN240X10 Endless Round Sling, 10 ft L, 21200 lb, Polyester, Blue
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Lift-All® Tuflex™ EN240X12 Endless Round Sling, 12 ft L, 21200 lb, Polyester, Blue
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
1/4" HALF ROUND NOSE CHISEL - MAY10502>
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
Martin 40BB17H 5/8 BB-H Ball Bearing Type A Idler Roller Chain Sprocket, 5/8 in Dia Bore, 2.97 in OD, 40 Chain, 17 Teeth, 1/2 in Pitch, Steel
Martin idlers are smooth-running and available in oil-impregnated, sintered bronze, extra-duty bearing press-fitted in sprocket and a hardened steel journal case for maximum resistance to wear. Steel sprockets used in Martin idlers are accurately machined (not stamped) the same as sprockets normally supplied for power transmission use. Martin can also alter existing sprockets and install bearings to make custom idlers.
