60516 Oxy-acetylene Cutting Tip, Size #4 Medium Duty Puroxcompatible.
OXY-ACETYLENE CUTTING TIP, SIZE #4 MEDIUM DUTY PUROXCOMPATIBLE.-FOR60516 >
Recently Viewed
60516 Oxy-acetylene Cutting Tip, Size #4 Medium Duty Puroxcompatible.
OXY-ACETYLENE CUTTING TIP, SIZE #4 MEDIUM DUTY PUROXCOMPATIBLE.-FOR60516 >
DOUBLE SHIELDED BALL BEARINGS-GEN2140688>
MORSE® 43503 1897 Non-Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, Bright
MORSE® 43503 1897 Non-Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, Bright
Hougen® 12118 12000 Annular Cutter, 9/16 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Gates® Power Transmission 4430V772 Bandless Multi-Speed V-Belt, 2-3/4 in W Top, 30 deg Groove, 78.6 in L Outside, Rubber
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
Dichtomatik N70034 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
