MIG Welding Machines
ESAB Rogue EM 190 PRO is an inverter-based MIG/MAG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding. With a weight of only 16.9 kg (37.3 lbs), single voltage input, 230V single-phase and compatibility with 11 kVA (10 kW) generators, this system provides maximum flexibility and portability, both in the shop and in the field.
ESAB Rogue EM 125 is an inverter-based MIG/MAG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and controls that allow the welder to fine tune arc characteristics based on the material they are welding. With a weight of only 12.6 kg (27.7 lbs), single voltage 120V single-phase input and compatibility with 6 kVA (4.8kW) generators, this system provides maximum flexibility and portability, both in the shop and in the field.
Recently Viewed
BALL BEARINGS-NAC6013ZZE>
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
60-GRIT SANDING PAPER-BSHRS060>
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
Thread Kits 1208-108 Coarse Thread Repair Kit, 1/2-13 Internal, 304 Stainless Steel, 6 Pieces
Thread Kits 1208-108 Coarse Thread Repair Kit, 1/2-13 Internal, 304 Stainless Steel, 6 Pieces
2-TON RATCHETING PULLER - GRW3624>