87093 L-duty/m-duty Welding Torch
L-DUTY/M-DUTY WELDING TORCH HANDLE-FOR87093>
Recently Viewed
L-DUTY/M-DUTY WELDING TORCH HANDLE-FOR87093>
Koyo 39585 Type-TS Cone, 2-1/2 in Dia Bore, 1.142 in W Cone, 0.14 in Max Shaft Fillet Radius, 207 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 39585 Type-TS Cone, 2-1/2 in Dia Bore, 1.142 in W Cone, 0.14 in Max Shaft Fillet Radius, 207 kN Load, For Use With 1-Row Tapered Roller Bearings
Reelcraft® 7600 OMS55 7000 Full Flow Swivel Hose Reel, 3/8 in ID x 0.71 in OD x 66 ft L Hose, 3000 psi Pressure, Domestic
Reelcraft's stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer, and industrial-solvent handling. Also suitable for coastal, offshore and on-board ship in marine applications where the harsh salt water spray environment requiring stainless steel reels.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
5-PINT BLUE SCOOP - JWH154116 >
GENERAL® 370-2 Horseshoe Magnet, 1-1/8 in W
