412404 DO-IT-BEST/HWI PRODUCTS
WATER HEATER PRESSURE RELIEF VALVE FOR WATER HEATERS UP TO 15,000 BTU'S. EXTENSION THERMOSTAT I THE HOT OUTLET LINE. MALE INLET AND FEMALE OUTLET 1/2"-JWH412404 >
Recently Viewed
WATER HEATER PRESSURE RELIEF VALVE FOR WATER HEATERS UP TO 15,000 BTU'S. EXTENSION THERMOSTAT I THE HOT OUTLET LINE. MALE INLET AND FEMALE OUTLET 1/2"-JWH412404 >
Milwaukee® 2951-20 M12™ Cordless Reconditioned Weather-Resistant Jobsite Radio, 12 V, Li-Ion Battery
CHARGE UP. HANG UP. TURN UP with the MILWAUKEE® M12™ Radio + Charger. This Bluetooth speaker with radio delivers unmatched sound for its size to turn it up on and off the jobsite. The speaker radio has built-in hanging features that enhance portability while allowing it to be hung up anywhere. A sleek design with integrated, concealed features and an IP54 rating provide increased durability. Achieve 10 hours of runtime on a CP 2.0, or use the 12V DC port to keep any M12™ batteries charged up throughout the day.
5/16" -IDX1/2" -OD VITON O-RING-CUS109VITON >
Red Devil® 0320 Final Finish Steel Wool, 0000 Super Fine Steel Wool
Leviton® 80503-W Midway Size Traditional Wall Plate, 1 Gangs, 3-1/8 in W x 4-7/8 in H, Thermoset, White
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
Browning® 1296474 T45L Automatic Torque Limiter, 1-3/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
