Floormount Drinking Fountain
Halsey Taylor® 8226080041 Deluxe Non-Filtered Cooler, Push Button Operation, Refrigerated Chilling, 3/8 in OD Tubing Connection, Domestic
Legacy floor standing or wall tight water cooler with an easy to clean and anti-splash rim basin. Features our exclusive Halsey Taylor® Double Bubbler™.
Recently Viewed
Browning® 1296953 Tightener Shaft, 1 in Dia x 3-1/8 in L Shaft, 4-3/8 in OAL
Browning® 1296953 Tightener Shaft, 1 in Dia x 3-1/8 in L Shaft, 4-3/8 in OAL
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
RBC® SJ8517 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 3 in Dia Bore, 3-3/4 in OD, 1 Row, 1-3/4 in W, 54100 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
14" NYLON DUST MOP--WITH 48 HANDLE-JWH646572 >
BBI 042014 Partially Threaded Cap Screw, 1/4-20, 1-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042014 Partially Threaded Cap Screw, 1/4-20, 1-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Nice® 608VBF53 600® Unground Thrust Bearing, 0.9 in Dia Bore, 1.89 in OD, 0.594 in W, 1326 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
