HCI Preferred Supplier 940137 Gate Valve, 2 in Nominal, 11.5 TPI FNPT End Style, C37700 Forged Brass Body
HCI Preferred Supplier 940137 Gate Valve, 2 in Nominal, 11.5 TPI FNPT End Style, C37700 Forged Brass Body
-
BrandGeneric
-
Manufacturer Part Number940137
-
CountryUSA
-
Port TypeFull
-
Pressure Rating200 psi WOG/125 psi WSP
-
Top to Inlet Center5.846 in
-
MediaCold Water, Oil, Gas and Saturated Steam
-
Trim MaterialBrass/PTFE
-
Hand Wheel Diameter3.819 in
-
Nominal Size2 in
-
Inlet to Outlet Length2.677 in
-
Softgoods MaterialNBR Rubber Seat
-
Domestic/ImportImport
-
Body MaterialC37700 Forged Brass
-
End Style11.5 TPI FNPT
- Full-port design for a better water flow
- Cast iron handle
- Good for diesel fuel
- Solid wedge
- Screw-In bonnet
- Non-Rising stem
-
UNSPSC40141613
-
Package Description2/BX
-
Standards/ApprovalsANSI B1.20.1
-
Catalog
Recently Viewed
HCI Preferred Supplier 940137 Gate Valve, 2 in Nominal, 11.5 TPI FNPT End Style, C37700 Forged Brass Body
HCI Preferred Supplier 940137 Gate Valve, 2 in Nominal, 11.5 TPI FNPT End Style, C37700 Forged Brass Body
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL62062ZNR >
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Milwaukee® 49-57-8305 Quick-Change Hole Saw Cutter, 3/4 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.
The Crescent Nicholson knife-shaped files have double-cut sides with smooth coarseness for a finer finish, then single-cut teeth down the sharp side for clearing corners or acute angles. The safe back design protects the user and the object you're filing, making this a perfect tool for tool and die makers who can utilize the triangular shape.
