Dixon® SCVS6 Safety Check Valve, 3/4 in, Brass Body
Dixon® SCVS6 Safety Check Valve, 3/4 in, Brass Body
-
BrandDixon®
-
Manufacturer Part NumberSCVS6
-
CountryUSA
-
Temperature Rating250 deg F
-
Pressure Rating350 psi
-
Flow Rate160 to 180 scfm
-
Nominal Size3/4 in
-
Dimensions3-9/16 in L
-
Body MaterialBrass
- High flow valve to provide optimum performance
- Controls excess air flow (scfm) in only one direction
- Automatically senses change in air flow and shuts off the flow in the event of a surge in excess of valve flow rating thus preventing hose whip
- Solid brass body and valve
- Stainless steel spring and roll pin
- Does not prevent backflow
- Prop65: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141600
-
Package Description10/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® SCVS6 Safety Check Valve, 3/4 in, Brass Body
#14-#16 X 1-1/2" Plastic Anchor
RBC® SJ7215 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 1-1/8 in Dia Bore, 1-5/8 in OD, 1 Row, 1-1/4 in W, 17300 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
5' ADAPTER HOSE-BNZHLDS032ADH>
Nice® 608VBF53 600® Unground Thrust Bearing, 0.9 in Dia Bore, 1.89 in OD, 0.594 in W, 1326 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Irwin® Vise-Grip® 22 18SP® Standard Locking C-Clamp, Nickel Plated, 9-1/2 in D Throat, 8 in Jaw Opening, 18 in L Jaw, Heat Treated Alloy Steel
The IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads, features 8"-wide jaw opening for more versatility and the ability to clamp a variety of items with just one tool. Pressure and fit can be adjusted with the turn screw that stays adjusted for repetitive use. Constructed of high-grade, heat-treated alloy steel for maximum toughness and durability, these small C-Clamps have swivel pads to protect work surfaces and the classic trigger release design that maintains maximum locking force where you need it..
