Klein® 5138 Voltage Tester Holder, 9-1/2 in L x 3 in W x 2 in D, Leather
Klein® 5138 Voltage Tester Holder, 9-1/2 in L x 3 in W x 2 in D, Leather
-
BrandKlein®
-
UPC092644550386
-
Manufacturer Part Number5138
-
CountryUSA
-
MaterialLeather
-
ColorBrown
-
Width3 in
-
Depth2 in
-
Length9-1/2 in
- Designed to hold most standard voltage testers
- Equipped with a snap to prevent the instrument from falling out of holder
- Single pocket
- Slotted to fit belts up to 1-3/4 in (44 mm) wide
-
UNSPSC41113600
Recently Viewed
Klein® 5138 Voltage Tester Holder, 9-1/2 in L x 3 in W x 2 in D, Leather
Klein® 5138 Voltage Tester Holder, 9-1/2 in L x 3 in W x 2 in D, Leather
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Proto® TorquePlus™ J3768 Flare Nut Wrench, Satin, Imperial, 1/2 x 9/16 in Double End Wrench, 6 Points, 7-1/2 in OAL, ASME B107.100
6" 600-SERIES UTILITY VISES-WIL656HD >
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
