Fluke® 3610452 Voltage Detector, 600/1000 V AC/V DC, 1000 to 2500 A, CAT III 1000 V/CAT IV 600 V
The Fluke 381 is the first clamp meter with a detachable, remote display and iFlex™ flexible current probe for easier, faster, safer measurements.
-
BrandFluke®
-
UPC095969537483
-
Manufacturer Part Number3610452
-
CountryUSA
-
MaterialHard Plastic
-
Frequency Rating500 Hz
-
Resistance60 kOhm
-
AC Current Accuracy2% +/-5 Digits at 999.9 A, 3% +/-5 Digits at 2500 A
-
Voltage Accuracy1.5% +/-5 Digits at 1000 VAC, 1% +/-5 Digits at 1000 VDC
-
Safety RatingCAT III 1000 V/CAT IV 600 V
-
Dimensions277 mm L x 88 mm W x 43 mm H
-
Display TypeRemovable Wireless
-
Jaw Capacity34 mm
-
Operating Temperature-10 to 50 deg C
-
Electrical Ratings999.9 A. 600 VAC, 1000 VDC
-
Temperature Rating-10 to 50 deg C Operation, -40 to 60 deg C Storage
-
Power Source(5) AA Alkaline Batteries
-
Voltage Rating600 V AC/1000 V DC
-
Amperage Rating1000 to 2500 A
- Easy navigation around hard to reach objects with the industry's only 320 x 240 IR camera with a 5.7 in touch screen LCD and a full 240 deg rotating lens
- The largest 5.7 in responsive LCD touch screen for a 320 x 240 infrared camera edit and analyze images on camera
- IFlex flexible current probe expands the measurement range to 2500 A ac
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Remote display True-rms AC/DC clamp meter
- 1000 A AC/DC current measurement with fixed jaw
- 2500 A AC current measurement with iFlex flexible current probe
- 1000 V ac and dc voltage measurement
- True-RMS AC voltage and current for accurate measurements on non-linear signals
- Frequency measurement to 500 Hz with both jaw and iFlex
- 60 kohm resistance measurement with continuity detection
- 7.5 um to 14 um (long wave) infrared spectral band, 10% to 95% non-condensing relative humidity, 0.03 g2/Hz (3.8 grams)
- < 90 % at 10 to 30 deg C, < 75% at 30 to 40 deg C operating humidity, 0 to 2000 m operating altitude, 0.01% deg C temperature coefficient, 1.3 in or 34 mm max Dia of measurable conductor
- <=30 Ohm measure continuity
- 100 ms measure inrush
- Range 5 to 500 Hz frequency via jaw and flexible current probe, 600 Ohm/6 kOhm/60 kOhm resistance, 2% +/-5 digit (10 to 100 Hz), 5% +/-5 digit (100 to 500 Hz) via jaw, 3% +/-5 digit via flexible current probe AC current accuracy, 1.5% +/-5 digit (20 to 500 Hz) AC voltage, 1% +/-5 digit DC voltage accuracy
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6FXH3 |
-
UNSPSC41113600
-
Package DescriptionBOX
-
Standards/ApprovalsEN 61326-1:2006|EN 61326-2-2:2006|ETSI EN 300 328 V1.7.1:2006|ETSI EN 300 489 V1.8.1:2008|FCC Part 15 SubPart C Section 15.207|FCC Part 15 SubPart C Section 15.209|FCC Part 15 SubPart C Section 15.249|FCCID: T68-F381RSS-210 IC: 6627A-F381|ANSI/ISA S82.02.01:2004|CAN/CSA C22.2 File No. 61010-1-04|IEC/EN 61010-1:2001 to 1000 VAC/VDC CAT III/600 VAC/VDC CAT IV|ECCN: 3A992|PROP65: This product is in compliance with Prop65, it is not known to contain any chemicals associated with this regulation
-
Warranty3 years
-
Owners/User Manual
Recently Viewed
Fluke® 3610452 Voltage Detector, 600/1000 V AC/V DC, 1000 to 2500 A, CAT III 1000 V/CAT IV 600 V
The Fluke 381 is the first clamp meter with a detachable, remote display and iFlex™ flexible current probe for easier, faster, safer measurements.
Justrite® 08207 Large Drum Funnel, Galvanized, For Use With 2 in Drum Bung and Flammables, 3/4 in NPT, Steel
Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drum’s content. Self-closing cover with a fusible link, that melts at 165°F (74°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.
PX-80 PARAFLEX COUPLING ELEMENT - DOD011108>
CRC® 03176 Non-Flammable Battery Cleaner, 12 oz Aerosol, Liquid Form, 80 to 90% Water, 5 to 10% Liquefied Petroleum Gas, 1 to 3% 2-Butoxyethanol, Clear
Water-soluble formula removes corrosion quickly and economically. Neutralizes acid spills. Restores battery output and reduces voltage leakage due to contaminants. Assures maximum battery current flow and promotes longer battery life.
Crescent® CCP8V 2-in-1 Combo Lineman's Plier, 20 to 10 AWG THK Max Wire, 1-1/16 in W Forged Alloy Steel Jaw, 8-1/4 in OAL
The Crescent 2-in-1 Combo Plier features an innovative design allowing it to do the job of two tools without sacrificing performance. The plier features two sets of jaws - a linesmen head and a wire stripper head - between the handles. The slide lock switch locks the handles in place for the desired plier head and makes switching between the two heads quick and easy.
Exclusive hollow shaft design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts
Hollow shaft facilitates work on bolt applications
Cushion-Grip handle allows for greater torque and comfort
Handle end is color-coded for easy identification
Internal flanges provide solid, twist-resistant shank anchor
