Fluke® VCHEK™ FLUKE-113 Utility Digital Multimeter, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display
Fluke® 113 digital multi-meter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple to use and has the features needed to repair most electrical problems. The Fluke® 113 has significant improvements over other digital multimeters available on the market, including Fluke® model 7-600. Using the Fluke® VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The min max function lets you record signal fluctuations. The Fluke® 113 can perform diode tests and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight and a much larger display that's easier to view, this meter is a must have for every toolbox.
-
BrandFluke®
-
UPC095969434522
-
Manufacturer Part NumberFLUKE-113
-
CountryUSA
-
Capacitance1000 nF, 10/100/9999 uF
-
Temperature Rating14 to 122 deg F
-
MaterialHard Plastic
-
Measuring Range600 VDC/VAC, 60 kOhm
-
Resistance600 Ohm/6/60 kOhm
-
TypeUtility
-
Accuracy2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VAC
-
Voltage Rating6/60/600 V AC/DC
-
Safety RatingCAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2
-
Battery Type9 VDC Alkaline/ANSI 1604A/IEC 6F22
-
Dimensions1.81 in L x 3.35 in W x 6.58 in H
-
Diode TestYes
-
Display TypeBacklight/Digital
-
Peak HoldNo
- VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True-RMS for accurate AC measurements on non-linear loads
- Large backlit display allows for easy visibility in low lit areas
- Record signal fluctuations using the minimum maximum function
- Diode test for testing general purpose germanium, silicon and power diodes
- Integral holster with probe holders for easy storage
- Auto and manual ranging for added user functionality
- Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety
- 2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy
- Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1)
- Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20)
- 300 hr typical alkaline, without backlight
- 3-3/4 digits 6000 count display
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2VGA1 |
-
Alternative Part Number3078875
-
UNSPSC41113630
-
Package DescriptionBOX
-
Standards/ApprovalsCE Marked|cCSAus Certified|UL Listed|ANSI/ISA 82.02.01 (61010-1) 2004|CAN/CSA C22.2 File No. 61010-1-04|UL File No. 61010-1 (2004)|IEC/EN 61010-1 2nd Edition|EMC EN 61326-1|ECCN: EAR99|PROP65: This product is in compliance with Prop65, it is not known to contain any chemicals associated with this regulation
-
Specification Sheet
Recently Viewed
Fluke® VCHEK™ FLUKE-113 Utility Digital Multimeter, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display
Fluke® 113 digital multi-meter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple to use and has the features needed to repair most electrical problems. The Fluke® 113 has significant improvements over other digital multimeters available on the market, including Fluke® model 7-600. Using the Fluke® VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The min max function lets you record signal fluctuations. The Fluke® 113 can perform diode tests and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight and a much larger display that's easier to view, this meter is a must have for every toolbox.
T-15 3/8"-DRIVE TORX BITS
10" MACHINIST HAMMER HANDLE
Milwaukee® 48-22-8110 Breathable Electrician's Work Belt, 29 Pockets, Denier Nylon, Black/Red
Milwaukee® work gear is nothing but heavy duty. Designed with professional tradesmen in mind and built with 1680denier nylon, riveted seams, and all metal hardware, Milwaukee work gear is up to 5X more durable than competitive products and provides users with unmatched durability, comfort and organization. The electricians work belt provides users with 29 pockets to organize their tools and incorporates a solid base that allows the belt to remain upright when set on a flat surface. The integrated handles allow the individual bags to be removed and easily transported from and task to task, while the metal tape measure clip securely stores a tape measure for easy access. A plastic lined puncture-resistant pocket allows users to store sharp objects, such as jab saws, without worry of damaging their bags and the included work belt is padded and breathable for all day comfort. This combination of extreme durability and functionality confirms Milwaukee's commitment to providing innovative, durable solutions to the end user.
Milwaukee V/CLEANER 27" METAL CREVICE TOOLS MWK 49-90-0410
For cleaning behind radiators and other hard to reach places where an extended reach is needed use the Milwaukee 27 in. crevice tool. Attaches to 1-1/2 in. I.D. hoses.
Bostitch® STCR50199/16-1 STCR 2619 Heavy Duty Staples, 9/16 in L Leg, Chisel Point, High Carbon Steel, 7/16 in W Crown
Each fastener is engineered for optimal performance. 9/16" Power Crown Staple. Comes with 1,000 per pack. Fits Bostitch #PC1000, #PC2K, #PC4000, #PC5000, #H30-8, True Value #803-745 and #T5-8 Staplers. Comes with 1,000 staples per pack. Has a rugged, coated finish which strengthens and protects the nail from rust and decay. Made with the highest quality.
