Greenlee® CMT-80 Clamp-On Meter/Electrical Tester, 0.9 to 400 A, 1.3 to 600 V AC, 999 Ohm/9.999 kOhm, 50 to 60 Hz/50 to 500 Hz, 1.06 in Jaw, LCD Display
-
BrandGreenlee®
-
UPC783310077350
-
Manufacturer Part NumberCMT-80
-
CountryUSA
-
Power Source9 V AC Battery (NEDA 1604/JIS 006P or IEC 6F22)
-
Frequency Rating50 to 60 Hz/50 to 500 Hz
-
Resistance999 Ohm/9.999 kOhm
-
Voltage Accuracy+/-1.5% + 0.3 V AC
-
Safety RatingCAT III 750/1000 V AC/DC/CAT IV 600 V AC
-
Counts6000
-
Display TypeLCD
-
Jaw Capacity1.06 in
-
Operating Temperature32 to 122 deg F
-
Electrical Ratings0.9 to 400 A, 1.3 to 600 V AC
- Hassle-free, automatic measurement of amperage, voltage,and resistance
- Low impedance eliminates stray or "ghost" voltage readings
- Compact design for measuring in tight spaces
- 400A AC, 600V AC/DC measurement
- Data hold to capture important readings
- Auto off for longer battery life
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 23X779 |
-
Alternative Part Number07735|8394028
-
UNSPSC41113630
-
IDEA Index ID8394028
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|cULus Listed|IEC 61010-1/IEC 60664
-
WarrantyLimited
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Krylon® K01407777 Solvent Based High Heat Spray Paint, 12 oz Container, 20 sq-ft Coverage, 15 min Curing
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
PUSH-TYPE HAND CLEANER DISPENSERS-PEM95140 >
HEAVY DUTY SPRAY ADHESIVE-MISA00315 >
