Starrett® 467M Thickness Gage, 0.04 to 5 mm, Tempered Steel
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Thickness Gage, .0.04-5.0mm Range, 13 Leaves.
-
BrandStarrett®
-
UPC049659524659
-
Manufacturer Part Number467M
-
CountryUSA
-
MaterialTempered Steel
-
Measuring Range0.04 to 5 mm
-
Dimensions8-55/64 in L x 3/4 in W
- Leaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thickness
- 100mm (4 in) base and 4mm (5/32 in) diameter measuring rods
- Leaves easily removed or replaced
- Rugged, substantial steel case protects leaves
- Straight Leaves
- Locking device on most gages permits securely locking one or more leaves in position
- Locking device on most gages permits securely locking one or more leaves in position
- 12.7 mm W x 120 mm L leaves
- Millimeter system of measurement
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 30C281 |
| MSC | 58703331 |
| Fastenal | 3124202 |
-
Alternative Part Number52465
-
UNSPSC41111600
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Catalog
-
Technical Bulletin
Recently Viewed
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Thickness Gage, .0.04-5.0mm Range, 13 Leaves.
Irwin® 5026011 Rotary Masonry Drill, 3/8 in Drill Bit, Straight Shank, Tungsten Carbide Cutting Edge, 13 in OAL
Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer drills with 3-jaw or Jacobs chuck.
ECONOMY SCREWDRIVER TESTER-GNLST400 >
ITM 201SD9664 Bit Shank Drill, 1-1/2 in Drill - Fraction, 1.5 Drill - Decimal Inch, 1/2 in Shank, M2 HSS
ITM 201SD9664 Bit Shank Drill, 1-1/2 in Drill - Fraction, 1.5 Drill - Decimal Inch, 1/2 in Shank, M2 HSS
IDC Select® IDC P1-1-1/8 Double Finished Bore Split Taper Bushing, 1-1/8 in Dia Bore, 1-15/16 in Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Fluke® FLUKE-115 Digital Multimeter, 600 VDC/VAC, 10 A, 40 MOhm Measuring, 600 V AC/DC, 10 A, 0.1 Ohm to 40 MOhm, Digital Display
Fluke® 115 True-RMS digital multi-meter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use. The Fluke® 115 displays True-RMS voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides min max average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy open Battery access door makes Battery changes a snap. Fluke® 115 multimeters are independently tested for safe use in CAT III 600 V environments. And check out other members of the Fluke® 110 family, the Fluke® 113 utility multi-meter, the Fluke® 114 electrical multi-meter, the Fluke® 116 HVAC multi-meter and the Fluke® 117 commercial electrician's multi-meter. Also check out the Fluke® 114 electrical multi-meter, the Fluke® 116 HVAC multi-meter with temperature and microamps and the Fluke® 117, the electrician's multi-meter with non-contact voltage.
