Keeney 1681K 1-Piece Pull Out Plug With Chain and Stopper, For Use With Sink and Brass Tubular, 1-1/4 in, 22 ga Brass, Import
Keeney 1681K 1-Piece Pull Out Plug With Chain and Stopper, For Use With Sink and Brass Tubular, 1-1/4 in, 22 ga Brass, Import
-
BrandKeeney
-
UPC462240057044
-
Manufacturer Part Number1681K
-
CountryUSA
-
FinishPolished Chrome
-
Material22 ga Brass
-
Type1-Piece
-
Dimensions5 in L
-
Domestic/ImportImport
-
Specifications1-1/4 in
-
Suitable For Use WithSink and Brass Tubular
-
UNSPSC30181800
-
IncludesChain and Rubber Stopper
-
Package Description5/PK
-
Standards/ApprovalsProp 65 WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
-
WarrantyLimited
-
Catalog
Recently Viewed
Keeney 1681K 1-Piece Pull Out Plug With Chain and Stopper, For Use With Sink and Brass Tubular, 1-1/4 in, 22 ga Brass, Import
Keeney 1681K 1-Piece Pull Out Plug With Chain and Stopper, For Use With Sink and Brass Tubular, 1-1/4 in, 22 ga Brass, Import
3-1/2" X 8" TIE-ROD HYD/CYLINDERS>
STRAIGHT LENGTH COPPER WATER PIPE. 99% PURE COPPER. I.D. MEASUREMENTS APPLY TO TYPE L WATER PIPE. TYPE L: HEAVY WALL FOR GENERAL PLUMBING AND HEATING PURPOSES.
-JWH484164 >
2-3/4" UNSEALED YOKE CAM FOLLOWERS-TORYCR44 >
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
6" X 3" SCOTCHBRITE SCOURING PAD-JWH612065 >
