Moldex® 6400 Rockets® Multi-Use Earplugs, 27 dB Noise Reduction, Flange Shape, ANSI S3.19-1974, Reusable, Uncorded Design
Moldex® 6400 Rockets® Multi-Use Earplugs, 27 dB Noise Reduction, Flange Shape, ANSI S3.19-1974, Reusable, Uncorded Design
-
BrandMoldex®
-
UPC092311640006
-
Manufacturer Part Number6400
-
CountryUSA
-
Plug ColorMagenta
-
Plug MaterialThermoplastic Elastomer
-
TypeMulti-Use
-
Noise Reduction Rating27 dB
-
SeriesRockets®
-
ShapeFlange
-
DesignUncorded
-
SizeUniversal
-
Disposable/ReusableReusable
-
Specifications MetANSI S3.19-1974
- Independently tested NRR 27, with a new sound dampening additive
- Easy grip handle lets earplugs easily slip into ear
- Air bubble in tip provides cushioned comfort
- Earplugs can be washed and reused
- 100% PVC free
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3NHL8 |
| Grainger | 3NHL8 |
-
UNSPSC42143523
-
Standards/ApprovalsANSI S3.19-1974
Recently Viewed
Moldex® 6400 Rockets® Multi-Use Earplugs, 27 dB Noise Reduction, Flange Shape, ANSI S3.19-1974, Reusable, Uncorded Design
Moldex® 6400 Rockets® Multi-Use Earplugs, 27 dB Noise Reduction, Flange Shape, ANSI S3.19-1974, Reusable, Uncorded Design
Koyo IR-88 Inch Series Regular Width Inner Ring, 1/2 in ID x 3/4 in OD, 0.515 in OAW, For Use With B-126, B-128, J-126, J-128, M-1261, M-1281 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
5/16" HARDWOOD FLAT HEAD PLUG-JWH236097>
Loctite® 235479 SI 5920™ 1-Part High Temperature Non-Corrosive Low Volatility RTV Gasket Maker, 300 mL Cartridge
Loctite® 235479 SI 5920™ 1-Part High Temperature Non-Corrosive Low Volatility RTV Gasket Maker, 300 mL Cartridge
99_100x100.jpg)
HEAVY DUTY LEVERAGE TOOL FOR PULLING POST, AND ALL KINDS OF STAKES. CONSTRUCTED OF HEAVY GAUGE STEEL, THE PULLER EASILY ATTACHES TO MOST POSTS OR STAKES IN SECONDS. IDEAL BALANCE MAXIMIZES LEVERAGE WHILE MINIMIZING EFFORT. PULLS A VARIETY OF STAKES AND IS MADE OF HEAVY GAUGE STEEL CONSTRUCTION
-JWH707664>
Zurn® QickTite® QC4 Unassembled Cone, 3/4 in Nominal, CTS End Style
