Klein® 60502 Hard Hat Earmuff, 26 dB Noise Reduction, Gray/Orange, ANSI S3.19-1974
Klein Tools Full Brim Hard Hat Earmuffs are designed to work with all Klein Tools Full Brim Hard Hats, and are intended to provide limited protection from harmful noise. Tested in accordance with ANSI S3.19-1974 standards, the NRR (noise reduction rating) for these earmuffs is 26dB. Designed for all day comfort and effective acoustic seal.
-
BrandKlein®
-
UPC092644605024
-
Manufacturer Part Number60502
-
CountryUSA|Canada
-
MaterialABS Plastic
-
ColorGray/Orange
-
TypeHard Hat
-
Noise Reduction Rating26 dB
-
Dimensions2.6 in H x 3.9 in W x 7.1 in L
-
Specifications MetANSI S3.19-1974
- Earmuffs designed for use with Klein Tools Full Brim Hard Hats
- Noise Reduction Rating (NRR): 26dB
- Soft foam ear cushions for effective acoustic seal and all-day wear
- Spacious interior for comfortable ear fit
- Designed with pivot positions on earmuff connector for in-use, stand-by, and storage positions
- Easy to adjust wire arms for customized fit
- Durable ABS plastic cup for rugged environments
-
Alternative Part Number19851757
-
UNSPSC46181901
-
IDEA Index ID19851757
-
Package DescriptionEACH
-
Standards/ApprovalsANSI S3.19-1974
-
WarrantyLimited Lifetime
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Klein Tools Full Brim Hard Hat Earmuffs are designed to work with all Klein Tools Full Brim Hard Hats, and are intended to provide limited protection from harmful noise. Tested in accordance with ANSI S3.19-1974 standards, the NRR (noise reduction rating) for these earmuffs is 26dB. Designed for all day comfort and effective acoustic seal.
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL16162RSNR >
ASP-622-S Industry Standard Clamping Collar, 2-Piece Construction, 5/8 in ID x 1-5/16 in OD x 7/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-872-S Industry Standard Clamping Collar, 2-Piece Construction, 7/8 in ID x 1-5/8 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-752-SS Industry Standard Clamping Collar, 2-Piece Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
MORSE® 59741 5970 General Purpose Premium Carbide Burr, Oval Head, 3/8 in Dia Head, 5/8 in L of Cut, 2-1/2 in OAL, Single Cut
MORSE® 59741 5970 General Purpose Premium Carbide Burr, Oval Head, 3/8 in Dia Head, 5/8 in L of Cut, 2-1/2 in OAL, Single Cut
