WERNER 4' POSITIONING LANYARD WFP C-111104
Werner positioning and restraint lanyards do not including any energy absorption features, so they are intended for work positions and restraint applications only. Unique wear indicating polyester webbing allows for easy inspection and provides durability that will last. The big head safety hook is designed to prevent false engagement.
-
BrandWERNER®
-
UPC051751103809
-
Manufacturer Part NumberC111104
-
CountryUSA
-
Load Capacity310 lb
-
Tensile Strength3000 lb
-
Specifications MetANSI Z359.2, OSHA 1910, OSHA 1926
-
Length4 ft
-
Line MaterialPolyester Webbing
- WebAlert™ inspectable polyester webbing makes wear and damage visible and obvious, making inspection easier, while providing durability that will last
- Big head safety hook is designed to prevent false engagement when connecting to the harness
-
UNSPSC46182302
-
Standards/ApprovalsANSI Z359.2|OSHA 1910/1926
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Werner positioning and restraint lanyards do not including any energy absorption features, so they are intended for work positions and restraint applications only. Unique wear indicating polyester webbing allows for easy inspection and provides durability that will last. The big head safety hook is designed to prevent false engagement.
3" X 1/16" X 1/4" CUTOFF WHEEL-PEACW0330T >
1-1/4" CAM FOLLOWER-MCGCF11/4SB >
1/8" DRILLBIT-REP300F1/8>
MORSE® 38176 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M36x3 Thread, D8 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 38176 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M36x3 Thread, D8 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
