Pyramex® SB1010SJ Safety Eyewear, Anti-Scratch, Clear Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166
Pyramex® SB1010SJ Safety Eyewear, Anti-Scratch, Clear Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166
-
BrandPyramex®
-
UPC814992002689
-
Manufacturer Part NumberSB1010SJ
-
CountryUSA
-
Temple StyleAdjustable Ratchet/Tilt
-
Frame ColorBlack
-
Frame MaterialPolycarbonate
-
Frame TypeFrameless
-
UV ProtectionYes %
-
SizeJumbo
-
Specifications MetANSI Z87.1, CE EN166
-
Lens CoatingAnti-Scratch
-
Lens ColorClear
-
Lens MaterialPolycarbonate
-
Bridge Size34.4 mm
- Tilt type adjustment allows optimum visibility
- Temples adjust to four settings
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- 99
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | PSB1010SJ |
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1-2010
-
Specification Sheet
Recently Viewed
Pyramex® SB1010SJ Safety Eyewear, Anti-Scratch, Clear Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166
Pyramex® SB1010SJ Safety Eyewear, Anti-Scratch, Clear Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166
RBC® SJ9728 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 4-1/4 in Dia Bore, 5-1/4 in OD, 1 Row, 2 in W, 85200 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
NIBCO® 851-060 1-Piece Solid Flange, 6 in, PVC, Socket, 150 lb, 10-31/32 in OD, Domestic
NIBCO® 851-060 1-Piece Solid Flange, 6 in, PVC, Socket, 150 lb, 10-31/32 in OD, Domestic
DeWALT® DWD525K Dual Mode VSR Hammer Drill Kit, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
