Pyramex® S3510SJ Lightweight Safety Eyewear, Anti-Scratch, Clear Lens, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87.1, AS/NZS 1337, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® S3510SJ Lightweight Safety Eyewear, Anti-Scratch, Clear Lens, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87.1, AS/NZS 1337, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
BrandPyramex®
-
UPC814992007073
-
Manufacturer Part NumberS3510SJ
-
CountryUSA
-
Temple StyleAdjustable Ratchet
-
Frame ColorBlack
-
Frame MaterialNylon
-
TypeLightweight
-
UV ProtectionYes %
-
SizeUniversal
-
Specifications MetANSI Z87.1, AS/NZS 1337, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
Lens CoatingAnti-Scratch
-
Lens ColorClear
-
Lens MaterialPolycarbonate
-
Bridge Size19.5 mm
- Designed to better fit today's prescription eyewear
- Lightweight nylon temples adjust for length and pitch
- Single lens encapsulates the eye for superb protection
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- Fits over frames up to 1-3/4 in H x 5-3/8 in W
- 99
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 23Y613 |
| Grainger | 23Y613 |
| Grainger | 23Y613 |
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1-2003|CAN/CSA Z94.3-07|CE EN166
-
Specification Sheet
Recently Viewed
Pyramex® S3510SJ Lightweight Safety Eyewear, Anti-Scratch, Clear Lens, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87.1, AS/NZS 1337, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® S3510SJ Lightweight Safety Eyewear, Anti-Scratch, Clear Lens, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87.1, AS/NZS 1337, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Greenlee® 00930 Ultra Hole Cutter Kit, 6 Pieces, For Use With 1/2 to 2 in Conduit, HSS
Greenlee® 930 Ultra Hole Cutter Kit, 6 Pieces, For Use With 1/2 to 2 in Conduit, HSS
Crescent® 62723N-02 Hacksaw Blade, 0.5 in W Blade x 12 in L Blade, Steel Cutting Edge, 18 TPI, Bi-Metal Blade
Crescent® 62723N-02 Hacksaw Blade, 0.5 in W Blade x 12 in L Blade, Steel Cutting Edge, 18 TPI, Bi-Metal Blade
7/16" -HEX BORE BALL BEARING-GULAFH2856 >
ASP-300-2-S Industry Standard Clamping Collar, 2-Piece Construction, 3 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic

