MSA V-Gard® 10115836 Contoured Visor, Clear, Polycarbonate, 8 in H x 17 in W x 0.04 in THK Visor, For Use With MSA V-Gard® Frames and Headgears, ANSI/ISEA Z87.1-2010, CSA Z94.3, EN 166 (2C-1.2 MSA 1B), AS/NZS 1337
MSA polycarbonate visors reliably protect against impact, chemical splash and ultraviolet radiation. They are the perfect solution for general and basic applications and can be worn with helmet-mounted earmuffs.
-
BrandMSA
-
UPC641817025833
-
Manufacturer Part Number10115836
-
CountryUSA|Canada
-
MaterialPolycarbonate
-
ColorClear
-
TypeContoured
-
Visor Height8 in
-
Visor Thickness0.04 in
-
Visor Width17 in
-
Specifications MetANSI/ISEA Z87.1-2010, CSA Z94.3, EN 166 (2C-1.2 MSA 1B), AS/NZS 1337
-
Suitable For Use WithV-Gard® Frames and Headgears
- For many visor versions, the sides are contoured towards the face for a closer fit and improved resistance to impact and splash hazards
- Can be worn with helmet-mounted earmuffs
- Superior UV protection
- Two thickness versions depending on your needs and budget
- Available with Antifog/Antiscratch coatings
- Special versions, called nitrometers, are designed to work with V-Gard Retractable or Standard Chin Protectors
- Visors with green tint help alleviate eye strain and fatigue by reducing excessive glare, especially in outdoor working conditions and are not for use where a Shade Infrared (IR) visor is required
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 77638328 |
| Grainger | 22EY56 |
| Fastenal | 1051227 |
-
UNSPSC46181707
-
Package DescriptionEACH
-
Standards/ApprovalsANSI/ISEA Z87.1-2010|CSA Z94.3|EN 166 (2C-1.2 MSA 1B)|AS/NZS 1337
-
SDS
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Technical Bulletin
Recently Viewed
MSA V-Gard® 10115836 Contoured Visor, Clear, Polycarbonate, 8 in H x 17 in W x 0.04 in THK Visor, For Use With MSA V-Gard® Frames and Headgears, ANSI/ISEA Z87.1-2010, CSA Z94.3, EN 166 (2C-1.2 MSA 1B), AS/NZS 1337
MSA polycarbonate visors reliably protect against impact, chemical splash and ultraviolet radiation. They are the perfect solution for general and basic applications and can be worn with helmet-mounted earmuffs.
Koyo TRB-2435 Double Direction Thrust Washer, 38.1 mm ID x 55.55 mm OD, 1.6 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
Combination Wrench, 1 in, Chrome Vanadium Steel, Polished Chrome
5/8" CONVOLUTED SLIT WIRE LOOM (FT)-GVIALZC5/8 >
Plumb® 11440 Autograf Premium Claw Hammer, 13 in OAL, Polished Face Surface, 16 oz Steel Head, Rip Claw, Hickory Wood Handle
Plumb® 11440 Autograf Premium Claw Hammer, 13 in OAL, Polished Face Surface, 16 oz Steel Head, Rip Claw, Hickory Wood Handle
E-Frame Breaker are Lighting Panelboard Circuit breakers that are proven effective and reliable which provide a wide variety or robust features that are use specifically in Square D NF Panelboards. This range of breaker is ideally designed to offer superior overload and short circuit protection. All E-Frame breakers have a thermal-magnetic trip unit as well as signal indicator that will indicate when a trip has occur. Mounting bolts are used to hold these breakers in place. This E-Frame breaker is 20A, 3 pole, and has an operating voltage of 480Y/277 VAC. It also provides a 25 kA max interrupt rating at 120 VAC. This device has a hold current of 270A which is the maximum current the breaker can be held to ensure it will trip and a trip current of 875A which is the current value when the breaker is guaranteed to trip. Many accessories are available for this breaker. This breaker was calibrated for 40 degrees C. This product is UL Listed as High Intensity Discharge. HACR rated.
